Wireless Networking 30 MCQs, Wi-Fi Standards and Security
Test your knowledge of wireless networking with this in-depth MCQ quiz. Covering Wi-Fi standards, protocols and security measures, this exam is ideal for networking enthusiasts and IT professionals. Boost your expertise today!
📌 Important Instructions
- ✅ This is a free test. Beware of scammers who ask for money to attend this test.
- 📋 Total Number of Questions: 30
- ⏳ Time Allotted: 30 Minutes
- 📝 Marking Scheme: Each question carries 1 mark. There is no negative marking.
- ⚠️ Do not refresh or close the page during the test, as it may result in loss of progress.
- 🔍 Read each question carefully before selecting your answer.
- 🎯 All the best! Give your best effort and ace the test! 🚀
Time Left: 00:00
1. What does the acronym Wi-Fi stand for?
- Wireless Fidelity
- Wired Free Internet
- Wide Frequency Internet
- Wireless Freedom
2. Which IEEE standard defines Wi-Fi technology?
- IEEE 802.3
- IEEE 802.11
- IEEE 802.15
- IEEE 802.16
3. What frequency bands are commonly used in Wi-Fi networks?
- 900 MHz and 2.4 GHz
- 2.4 GHz and 5 GHz
- 5 GHz and 60 GHz
- 1 GHz and 2 GHz
4. Which Wi-Fi standard supports speeds up to 54 Mbps?
- 802.11a
- 802.11b
- 802.11g
- 802.11n
5. What is the maximum theoretical speed of 802.11ac Wi-Fi?
- 600 Mbps
- 1.3 Gbps
- 3.2 Gbps
- 7 Gbps
6. WPA stands for:
- Wireless Protected Access
- Wi-Fi Protected Access
- Wireless Private Authentication
- Wi-Fi Private Access
7. Which encryption method is considered the most secure for modern Wi-Fi networks?
- WEP
- WPA
- WPA2
- WPA3
8. What is the main purpose of a Service Set Identifier (SSID) in Wi-Fi networks?
- To encrypt data
- To identify a Wi-Fi network
- To authenticate users
- To manage bandwidth
9. Which Wi-Fi frequency band offers better range but is more prone to interference?
- 2.4 GHz
- 5 GHz
- 60 GHz
- 1 GHz
10. What is the purpose of a Wi-Fi hotspot?
- To manage network security
- To provide wireless internet access
- To increase signal range
- To connect multiple devices using cables
11. Which Wi-Fi standard introduced OFDMA technology?
- 802.11g
- 802.11n
- 802.11ac
- 802.11ax
12. Which security protocol replaced WEP due to its vulnerabilities?
- WPA
- WPA2
- WPA3
- TKIP
13. Which of the following is a feature of Wi-Fi 6 (802.11ax)?
- Single-user MIMO
- Increased latency
- MU-MIMO support
- Limited device capacity
14. What is a mesh Wi-Fi system designed to do?
- Increase internet speed
- Extend wireless coverage seamlessly
- Replace traditional routers
- Provide higher security
15. Which of the following is NOT a Wi-Fi security threat?
- Packet sniffing
- Phishing
- Rogue access points
- Denial-of-Service (DoS) attacks
16. What technology does Wi-Fi use to avoid collisions during data transmission?
- CSMA/CD
- CSMA/CA
- Token Ring
- Time Division Multiplexing
17. Which Wi-Fi standard operates exclusively in the 60 GHz band?
- 802.11a
- 802.11ac
- 802.11ad
- 802.11ax
18. What is the default port used by WPA2-Enterprise for authentication?
- 80
- 443
- 1812
- 8080
19. Which of the following is a Wi-Fi vulnerability associated with open networks?
- DNS hijacking
- Data interception
- IP spoofing
- Packet duplication
20. What is the typical range of a standard indoor Wi-Fi network on 2.4 GHz?
- 20-30 meters
- 50-70 meters
- 100-150 meters
- 200-300 meters
21. Which technology in Wi-Fi 6 reduces power consumption for connected devices?
- Beamforming
- OFDMA
- Target Wake Time (TWT)
- MU-MIMO
22. What is the maximum theoretical speed of 802.11n?
- 150 Mbps
- 300 Mbps
- 600 Mbps
- 1.2 Gbps
23. What does "SSID hiding" do in a Wi-Fi network?
- Prevent unauthorized access
- Make the network invisible to devices
- Encrypt transmitted data
- Improve connection speeds
24. What type of Wi-Fi antenna provides coverage in all directions?
- Directional
- Omnidirectional
- Parabolic
- Yagi
25. Which of the following is an advantage of Wi-Fi 6 over previous standards?
- Reduced device capacity
- Higher interference
- Faster speeds and lower latency
- Limited range
26. WPA3 introduces which feature for improved security?
- TKIP encryption
- SAE (Simultaneous Authentication of Equals)
- Pre-shared key encryption
- WPS support
27. What is the primary function of Wi-Fi Direct?
- Connect devices without a traditional network
- Increase internet speed
- Extend wireless range
- Encrypt data for security
28. Which protocol is used to manage handoffs between Wi-Fi access points?
- DHCP
- ICMP
- 802.11r
- ARP
29. What does the term "bandwidth throttling" mean in Wi-Fi networks?
- Increasing network speed
- Limiting data usage on a connection
- Preventing unauthorized access
- Boosting signal strength
30. Which frequency band is less congested and offers faster speeds in Wi-Fi networks?
- 2.4 GHz
- 5 GHz
- 60 GHz
- 900 MHz